Illustration: official 20 FT expandable container house visual; depicts only this model in the comparison.
Models and their published references
The Expandable Container House references cover 720 Compact, 20 FT, 30 FT and 40 FT. Each model has separate entries for expanded dimensions, transport dimensions, approximate area and weight. Reading these categories together provides a comparison while preserving the values associated with each model.
The model names identify the entries being compared. The dimensions describe their expanded and transport states, while area and weight provide separate points of comparison. Each category has its own pattern, so the models should be compared across the published entries rather than through their names alone.
Expanded dimensions
The expanded dimensions are 5900 × 4820 × 2480 mm for 720 Compact; 5900 × 6300 × 2480 mm for 20 FT; 9000 × 6220 × 2480 mm for 30 FT; and 11800 × 6220 × 2480 mm for 40 FT.
The 720 Compact and 20 FT share the first listed measurement, but the 20 FT has a larger second measurement. The 30 FT and 40 FT share the second measurement of 6220 mm, which is below the 20 FT reference of 6300 mm. All models share the final measurement of 2480 mm. Expanded dimensions therefore do not increase uniformly across every measurement.
Transport dimensions
The transport dimensions are 5900 × 720 × 2480 mm for 720 Compact; 5900 × 2200 × 2480 mm for 20 FT; 9000 × 2200 × 2480 mm for 30 FT; and 11800 × 2200 × 2480 mm for 40 FT.
The 720 Compact has the smallest second transport measurement. The 20 FT, 30 FT and 40 FT share a second transport measurement of 2200 mm, while their first measurements increase in that order. The final measurement is shared across all models. These entries describe transport dimensions without establishing a shipment loading quantity or packing arrangement.
Approximate area
The published areas are approximately 28.4 m² for 720 Compact, approximately 37.2 m² for 20 FT, approximately 56.0 m² for 30 FT and approximately 73.4 m² for 40 FT. The approximate qualification applies to each model’s area reference.
The listed areas increase from 720 Compact through 20 FT and 30 FT to 40 FT. This establishes their relative order by published area; it does not establish internal room dimensions, a particular layout or suitability for an intended use.
Published weight comparison
The published weights are 2.5 t for 720 Compact, 3.6 t for 20 FT, 5.8 t for 30 FT and 6.5 t for 40 FT.
The 720 Compact has the lowest listed weight, followed by 20 FT and then 30 FT. The 40 FT has the highest listed weight. This comparison preserves the published values and their model associations without calculating differences or assigning handling requirements to any model.
